Pay attention to these points when using and installing Petrol Car wheel hub bearings

1. In order to ensure safety and reliability to the greatest extent, it is recommended that you check the Petrol Car wheel hub bearings frequently regardless of the age of the vehicle - pay attention to early warning signs of bearing wear: including any friction noise when turning or abnormal deceleration of the suspension combination wheel when turning. For rear-wheel drive vehicles, it is recommended to lubricate the front wheel hub bearings after the vehicle has traveled 38,000 kilometers. When replacing the brake system, check the bearings and replace the oil seals.

2. If you hear noise coming from the Petrol Car wheel hub bearing part, first of all, it is important to find the location where the noise occurs. There are many moving parts that may produce noise, or some rotating parts may come into contact with non-rotating parts. If it is confirmed that it is noise in the bearing, the bearing may be damaged and needs to be replaced.
3. Because the working conditions that cause the failure of the bearings on both sides of the front wheel hub are similar, it is recommended to replace them in pairs even if only one bearing is broken.
4. Petrol Car wheel hub bearings are relatively sensitive and require the correct method and appropriate tools in all cases. During storage and installation, the bearing components cannot be damaged. Some bearings require greater pressure to be pressed in, so special tools are required. Be sure to refer to the Chery Car manufacturing instructions.
5. When installing the bearing, it should be in a clean and tidy environment. Small particles entering the bearing will also shorten the service life of the bearing. It is very important to maintain a clean environment when replacing the bearing. It is not allowed to hit the bearing with a hammer, and be careful not to drop the bearing on the ground (or similar improper handling).
Chery Car waterproof connector is a special Chery Car connector. The function of Chery Car connector is generally used to connect various electronic components inside the Chery Car. To ensure the normal operation of the circuit, you must also pay attention to whether the various interfaces are good. Chery Car connectors are generally inside Petrol Car, and many people will not pay attention to their own waterproofing, which is a wrong idea. Therefore, Chery Car waterproof connectors appear, which can well solve the problem of water seepage that may occur during car cleaning or driving in rainy days, and ensure that Petrol Car will not be affected in the case of water seepage. We cannot hope that there will be no water seepage, but we should be prepared for waterproofing. At this time, the importance of Chery Car waterproof connectors is reflected.