As an important means of transportation for our daily travels, Geely Car parts have greatly facilitated our lives. In addition to human factors, accessories are also an important part that affects the life of Petrol Car. A good horse and a good saddle can make the most of its power. If you use inferior parts, you won`t save money and sometimes endanger the driver`s life.
1. Pay attention to the function of the mat. The mats between static parts of Petrol Car act as a leak-proof and sealing function. If the materials, production quality and installation do not meet the technical specifications, the sealing and leakage prevention effect will not be achieved, and an accident may even occur. For example, the oil pan or valve cover is difficult to compact due to its large contact area, causing oil leakage.
2. Various fastening nuts on Petrol Car need to be tightened according to the specified torque. If the pressure is too loose but not tight, the gasket will leak; if it is too tight, the metal around the screw hole will bulge or the screw will tighten, causing oil leakage. In addition, if the oil drain screw of the oil pan is not tightened or becomes loose and falls off, it is easy to cause oil loss and then damage the shaft due to burnt tiles.
3. Replace the faulty oil seal promptly. Due to improper installation, many dynamic components of Petrol Car will throw oil due to misalignment of the journal and oil seal blade. Some oil seals lose elasticity due to rubber aging. Leaks should be updated promptly.
4. Avoid clogging of one-way valves and ventilation valves. Therefore, the temperature inside the box increases, and the oil and gas fills the entire space and cannot be discharged, which increases the pressure inside the box and increases the lubricating oil consumption and replacement cycle. When the engine ventilation system is blocked, the movement resistance of the piston increases and fuel consumption increases. Due to the pressure difference between the inside and outside of the tank shell, oil leakage often occurs in weak sealing parts. Therefore, it is necessary to regularly inspect, dredge and clean vehicles.
5. Properly solve the sealing problems of various oil pipe joints. The union pipe nuts of Petrol Car are often disassembled and assembled, and the threads are prone to slipping and loosening, which can lead to oil leakage. Replace the union pipe nut, use grinding method to solve the cone seal, make the nut compress, and solve the sealing problem.
6. Prevent wheel hub from throwing oil. There is too much lubricating oil in the hub bearing and cavity, or the oil seal is improperly assembled, of poor quality, and aging and failing; frequent braking causes the hub temperature to be too high; loose axle nuts can cause the hub to throw oil. Therefore, cavity lubrication method should be used to clear the pores.
Oil leakage often occurs during vehicle use. Oil leakage not only directly affects the technical performance of Petrol Car, leading to waste of lubricating oil and fuel and power consumption, but also affects the cleanliness and environmental pollution of Petrol Car.
In the face of oil leakage, Petrol Car have great hidden dangers, which may cause accidents or reduce the service life and durability of Petrol Car. Therefore, when a Geely Car is leaking oil, the problem should be discovered as soon as possible and the oil leakage problem of the Geely Car should be dealt with promptly.
