Before using an Electric Car, you should pay attention to check whether the vehicle is in good condition, such as whether the tire pressure is sufficient, whether the front and rear brakes are sensitive, whether there are any abnormalities in the vehicle, whether the screws are loose, and whether the battery is fully charged. When an Electric Car is just started, it should be accelerated slowly to avoid damage to components due to sudden acceleration.
In order to extend the life of the battery and motor, pedal assistance is used when starting the Electric Car and climbing hills. Under the premise of ensuring safety, frequent braking and starting should be minimized while driving to save electric energy. When charging, be careful not to use chargers from other brands. Each brand's charger matches the performance of the battery. Only a dedicated charger can achieve the best charging effect.
The charger contains high-voltage circuits. Do not disassemble it without authorization. When charging an Electric Car, do not cover the charger with anything and place it in a ventilated place. At the same time, pay attention to prevent liquid and metal particles from entering the charger, and prevent falling and impact, which may cause damage.
1. The bending and torsional deformation of the frame destroys the relative position of each assembly, causing early damage to the Electric Car assembly.
2. Affects the position of the front wheel of the front axle and accelerates tire wear.
3. Causes the transmission to become skewed and misaligned, affecting force transmission and accelerating gear wear.
4. It affects the transmission shaft, suspension and other positions, accelerating wear and making noise.
5. Affect the driving stability and braking effect of Changan Electric Car and cause uneven wear of tires.
6. The deformation or breakage of the frame may seriously affect the driving safety of Changan Electric Car and even cause accidents.
7. The loosening of frame rivets reduces the strength and stiffness of the Electric Car frame and accelerates the deformation and fracture of the frame.