Petrol Car parts manufacturers say that there are many types of Petrol Car steering gears, the most commonly used ones are gear rack type, worm crank finger pin type, recirculating ball-rack tooth sector type, recirculating ball crank finger pin type, worm roller type, etc.
Gear rack type Petrol Car steering gear is the most common, and its basic structure is a pair of intermeshing pinions and racks. When the steering shaft drives the pinion to rotate, the rack moves in a straight line. Sometimes, the rack is used to directly drive the tie rod to make the steering wheel turn.
Gear rack type Petrol Car steering gear has a simple structure, low cost, sensitive steering, and small size, and is widely used in Chery Car.1. Easy to recycle
Petrol Car plastic accessories use recyclable materials, reduce the types of materials, and are easy to recycle.
2. Reduce vehicle weight
Plastic materials of Petrol Car plastic accessories replace metal materials, reduce vehicle weight, save fuel, and save consumption.
3. Use of new materials
The use of some new materials, such as LEF-PP, replaces metal and traditional engineering materials, which is green and environmentally friendly and saves energy consumption.
4. Unscrew the two screws, put them on the Chery Car and tighten them;
5. Install the bracket with the mounting head facing the correct position and make sure the bracket is secure;
6. Install the Chery Car rearview mirror on the bracket and tighten the locking button;
7. Use the ball head to rotate the tuning knob to move the joint to adjust the appropriate angle.