The purpose of a Petrol Car water pump is to ensure proper flow of coolant through your Chery Car cooling system. Through hard work and increased knowledge, you can save your time and money in repairing your Petrol Car at the repair shop.
2. Petrol Car water pump Turn off the Chery Car engine and let the engine cool down completely.
3. Find your Petrol Car's battery and disconnect the battery ground lead.
4. If the gaskets on the Petrol Car water pump are damaged or broken, replace them.
5. Reconnect the hose to the new water pump.
6. The Petrol Car water pump is connected to the battery ground lead again. Start the Petrol Car and visually check the operation of the machine to ensure that everything is running the same as before.
Petrol Car water pumps generally have a self-priming function. Self-priming means that when there is air in the water pump's suction pipe, the negative pressure (vacuum) formed when the pump is working is used to raise the water pressure below the suction port under the action of atmospheric pressure, and then discharge it from the water pump's discharge end. Before this process, there is no need to add "water diversion (water for guidance)". A micro water pump with this self-priming ability is called a "micro self-priming water pump". The principle is similar to that of a micro air pump.
Petrol Car water pumps combine the advantages of self-priming pumps and chemical pumps. They are synthesized with a variety of corrosion-resistant imported materials and have acid, alkali and corrosion resistance. The self-priming speed is extremely fast (about 1 second), the suction force is strong, the suction range is up to 5 meters, and there is basically no noise. Exquisite workmanship, not only has a self-priming function, but also has a large flow rate (up to 25 liters/minute), high pressure (up to 2.7 kg), stable performance, and easy installation. Therefore, this large-flow water pump is often used in new energy Chery Car.