The printing or casting and markings on the surface of the original Petrol Car accessories are clear and regular, while the appearance of counterfeit products is rough.
Some original Petrol Car accessories specify a certain color on the surface. If other colors are encountered, they are counterfeit and inferior parts.
3. Look at the texture
The materials of the original Petrol Car accessories are qualified materials according to the design requirements, and counterfeit products are mostly replaced by cheap and inferior materials.
4. Look at the paint
Illegal merchants will simply process the waste accessories, such as disassembly, assembly, splicing, assembling, painting, etc., and then sell them as qualified products to illegally obtain high profits.
5. Look at the connection
If the clutch plate rivets are loose, the brake hose is debonded, the electrical parts joints are desoldered, and the paper filter element joints are detached, they cannot be used.
6. Look at the logo
Some regular Petrol Car parts are marked with certain marks, such as the gear mark, the piston top mark and other assembly marks, which are used to ensure the correct installation of the parts. Those without them cannot be purchased.
7. Check the storage
If the Hongqi Car parts have problems such as cracking, oxidation, discoloration or aging, it may be caused by poor storage environment, long storage time, poor material itself, etc.
8. Check the packaging
The packaging of original Hongqi Car parts is generally standardized, with unified standard specifications and clear and regular printing, while the packaging and printing of counterfeit products are relatively rough, and it is often easy to find flaws from the packaging.
9. Check the certificates
Some important parts, especially assemblies, such as carburetors, distributors, generators, etc., are generally accompanied by instructions and certificates when leaving the factory to guide users to install, use and maintain. If there are no such products, they are mostly counterfeit and shoddy products.
10. Check the protective layer
In order to facilitate storage and prevent parts from being bumped, parts have a protective layer before leaving the factory. For example, bushings, large and small bearings, pistons, valves, etc. are generally protected with paraffin to prevent damage to their surfaces. If these important parts do not have a protective layer on the surface, they are mostly parallel imports.