Chongqing Yuntu Automobile Trading Co., Ltd.

Chongqing Yuntu Automobile Trading Co., Ltd.

Emergency repair techniques when common Petrol Car parts are damaged

2026 03/13

When a Petrol Car breaks down, you should go to a professional service station for repair in time. However, sometimes sudden failures during driving often catch the car owner off guard. There are some commonly used parts in the car, which requires the car owner to have certain maintenance skills to avoid calm response in emergency situations.

Baic 80

1. When the steering tie rod is broken, you can stick it with a wooden stick and then tighten it with iron wire. After tightening both ends in this way, you can control the steering
2. Oil tank leaks can be glued with epoxy resin or smeared with soap, and large holes can also be plugged with wooden plugs.
3. If the instrument wire or the wires in other places are discharged with iron, it will be difficult to eliminate it for the time being. The live wires of these circuits can be left unconnected and powered only to the ignition system.
4. If the additional resistor of the ignition coil is damaged, you can short-circuit the ignition coil switch and switching power supply wiring to ensure the operation of the Baic Car engine.
5. If the generator assembly is damaged and cannot be repaired temporarily, you can remove all the generator wiring and suspend it, so that only the battery supplies power to the ignition system.
6. If the valve spring is seriously broken, remove the adjusting screw on the cylinder valve stem to keep the valve closed and the gasoline engine running.
7. If the front brake hose leaks and seriously affects the work of the brake system, the air path from the control valve to the front brake chamber can be cut off to ensure the normal operation of the brake system.