The Honda Car products slowly break down during the braking process of Petrol Car and should be used as spare parts. If the driver cannot find a Petrol Car and pay attention to the wear and tear of the Petrol Car, it will not only cause safety hazards due to the reduction of braking effect, but also seriously endanger the safety of passengers, so be careful. The importance of daily inspection and protection of Petrol Car is crucial:
1. Carry out two inspections at the Honda Car manufacturer's factory every 6,000 kilometers driven under appropriate driving standards. During the wound inspection, not only the remaining thickness is measured, but the brake lining is also inspected for damage. Compare whether the damage degree of the Petrol Car on both sides is the same and whether it is easy to return. If anomalies are discovered, they must be addressed immediately.
2. Honda Car usually consist of steel lining and friction materials. There is no need to wait for the friction material to wear out before removing a Petrol Car. Some Petrol Car have a braking system alarm function. If the damage limit is exceeded, the digital display will sound an alarm to remind you to replace it. The Honda Car product has exceeded usage limits and must be replaced. Even if it can be used for a period of time, the braking effect will be reduced and driving safety will be endangered.
3. When disassembling and replacing the brake pads of Jiangsu Petrol Car, they must be replaced with qualified brake pads produced by reliable manufacturers. Creating a braking effect between the brake pad and brake disc is a suitable method without causing damage.
4. When removing and replacing the brake lining, maintenance tools must be used to push the brake cylinder back. Do not use other pry bars to press back, or the brake caliper guide screws may bend and the brake lining may become stuck.
5. After replacing Honda Car manufacturer's products, just step on the Petrol Car to clear the gap between the Petrol Car and the brake disc. The Petrol Car needs to travel 150 kilometers to achieve excellent braking effect.
2. Honda Car usually consist of steel lining and friction materials. There is no need to wait for the friction material to wear out before removing a Petrol Car. Some Petrol Car have a braking system alarm function. If the damage limit is exceeded, the digital display will sound an alarm to remind you to replace it. The Honda Car product has exceeded usage limits and must be replaced. Even if it can be used for a period of time, the braking effect will be reduced and driving safety will be endangered.
3. When disassembling and replacing the brake pads of Jiangsu Petrol Car, they must be replaced with qualified brake pads produced by reliable manufacturers. Creating a braking effect between the brake pad and brake disc is a suitable method without causing damage.
4. When removing and replacing the brake lining, maintenance tools must be used to push the brake cylinder back. Do not use other pry bars to press back, or the brake caliper guide screws may bend and the brake lining may become stuck.
5. After replacing Honda Car manufacturer's products, just step on the Petrol Car to clear the gap between the Petrol Car and the brake disc. The Petrol Car needs to travel 150 kilometers to achieve excellent braking effect.